|1||Hematologic analyzer||Swelab Alfa or another with counting blood cells from 0.||1
|3||Hemoglobin level analyzer Plasma/Low Hb||or another with the definition of free hemoglobin||2
|4||Donor armchair||The electric chair donor consists of three sections covered with medical artificial leather and mounted on a stable metal frame with an electric lift. The sections of the back and legs are regulated. The same armchair is equipped with two adjustable armrests on both sides for placement of the donor's hands.|
General: 500x1300x550 mm .;
Back cacti - 460h800 mm .;
Seat cabinet - 460x340 mm .;
Cecka of legs - 460х500 mm.
|5||Tool table||Tool table (stainless steel). The table is made of a metallic stainless steel profile. The upper and lower shelves are made of stainless steel. Overall dimensions: 660 * 430 * 900 mm. Shelf Size: 425 * 585 mm. The height of shelves from the floor is 425 and 775 mm.||4
|6||Apparatus plasmapheresis||The system of automated plasmapheresis "Autofrees-C".||1
|7||Filler PCB tubes||Mobile handheld device for sealing polyvinylchloride highways.||7
|8||Welders PCB tubes||Device for sterile connection. should connect PVC lines in all possible combinations, namely dry with dry, filled with liquid with dry, two lines with liquid.||1
|9|| Refrigeration centrifuge||Refrigeration centrifuge - stationary, periodic action, with digital control system. It is used in the blood supply service for blood components obtained from donors.|
The maximum volume of the centrifuge is 6000 ml. Provides a rotational speed of 500 rpm to 6000 rpm. The temperature mode in the working chamber is programmable. Temperature range from plus. 2 ° С to plus 15 ° С. Accuracy of temperature maintenance ± 1 ° С.
|10||Laboratory centrifuge||Centrifuge medical - centrifuge laboratory clinical portable, periodic action. It is intended for use in the practice of laboratory clinical diagnostics for dividing into fractions inhomogeneous liquid systems with a density of up to 2 g / cm3 under the influence of centrifugal forces. The centrifuge ensures the setting of the rotation speed of the probe holder in steps of 1000, 1500, 3000 rpm with the light signaling of the set speed stage. The centrifuge is equipped with a 24-hole tube holder. The test tube holder is designed to work with "vaktayner" type tubes with a capacity of 1.7 to 10 ml. At the same time, it is possible to place tubes at the same time: - 12 pcs with capacity from 1.7 to 5 ml (dia.13 mm) and 12 pcs with capacity from 7 to 10 ml (dia.16 mm).||4
|11||Plasma Extractor mechanical|| The device is intended for the transfer of blood components from one polymer container to another.||12
|12||The device is automatic for extraction of blood components||An automatic device designed to quickly and accurately separate donor blood into high-quality components, followed by sterile sealing of the lines.||1
|13||Plasma thawer||Rinse plasma for fast, safe and uniform defrosting while maintaining the plasma containers and blood components in a dry condition.||1
|14|| Refrigerator||Refrigerator for storage of blood and its components Temperature range: + 2 ... + 6 ° С. Volume: 250 l. Execution: vertical. |
Internal dimensions: (B * W * D) 1920x600x600.
|15|| Refrigerator||Low temperature refrigerator for storing serum / plasma archival samples||3
|16|| Refrigerator||Refrigerator for storing tests, reagents and samples||5
|17|| Refrigerator||Refrigerator for storage of blood and its components vertical Total volume 300 l, with drawer, alarm system (temperature, open door, electricity), digital microprocessor controller, fluorescent lighting.|
Temperature range: 0 ... + 10 ° C
|18|| Refrigerator||Refrigerator for storage of blood and its components vertical Total volume 150-200 l, with shelves, alarm system (temperature, open door, electricity), digital microprocessor controller, fluorescent lighting. Temperature range: 0 ... + 10 ° C||1
|19|| Refrigerator||Household refrigerator For storing food with shelves. Required volume - 150-200l.||2
|20||Low temperature medical freezer for blood plasma (horizontal)||Necessary volume 250 - 300 liters. Microprocessor temperature control (-10 to -45 ° C, at 20 ° C approx., In increments of 1 ° C); Text digital display; Sound and visual signaling of the failure in the operation of the refrigerator, signaling failure in the power supply, signaling change temperature mode, text display alarm; Execution - horizontal.||8
|21||Battery powered refrigerants||The temperature elements are intended for transportation and storage of frozen clinical specimens and other frozen materials. Reusable items are non-toxic, sealed. Elements should be simply pre-cooled at a temperature below -23 ° C, until the solidification of the liquid. V, L: 0.4; Size, mm: 170x85x35; Weight, kg: 0.55.||10
|22||Plasma shock freezer. ||Plasma shock freezer. The horizontal freezing function is configured in such a way that it allows uniformly freezing the plasma without deformation of the containers, which greatly simplifies further processing.|
Core temperature / freezing time:
- for standard containers (400ml) -30 ° C, approximately 30 minutes;
- for large containers (1000 ml) -30 ° C, about 40 minutes.
|23||Device for virus inactivation of components of donor blood||Mirasol system for reducing pathogens in platelets and plasma.||1
|24||Thrombosheker||The system is designed to store platelets for up to 5 days. Equipped with forced circulation of air, condensate evaporator, module of constant temperature registration, alarm systems. Trombomikser with perforated shelves at the same time allows simultaneous storage of 5-10 aperesis containers.||1
|25||Thermo-insulating medical container||Medical sealed thermo bag for short-term transportation of drugs, blood and its components. Made of durable nylon and insulating material, medical bags refrigerators are used as insulation for various modular cooling elements. The bag has a document compartment and a shoulder strap. The bag is fastened with a zipper. The volume of the bag is 20l and 40l.||2
|26||Capacities for biowaste||Capacities for biowires 30l.||11
|27||Thrombocyte concentrate storage device (thermo shaker)||The system is designed to store platelets for up to 5 days. Equipped with forced circulation of air, condensate evaporator, module of constant temperature registration, alarm systems. Trombomikser with perforated shelves at the same time allows simultaneous storage of 5-10 aperesis containers.||1
|28||Filtration and air conditioning system for donation and production facilities||Filtration and air conditioning system for donation and production facilities:|
1. Donation hall - 130.6 m3
2. Hall for plasmonphyrosis - 112.6 m3
3. Prefabrication of primary fractionation - 114.0 m3
4. Clinical laboratory - 401,0 m3
Total 758.2 m3
|29||Steam sterilizer||Technical characteristics: sterilization chamber made of high-alloy stainless steel; The camera has a cylinder shape and is horizontally located; built-in steam generator; manual pouring of water into the steam generator; semi-automatic control; heating time - no more than 30 minutes; preliminary removal of air from the camera - by gravity blowing method; Vacuum drying using a condenser, the dilution depth - not less than -0,06 MPa; a filter of bacterial purification of air entering the chamber at the stage of equalization of pressure of water consumption for 1 cycle of sterilization (with a drying) - not more than 100 l; camera volume, dm3 - 100; boot volume of the camera, dm3 - 72; camera dimensions (diameter x depth), mm - 400x830; Overall dimensions (ДхШхВ), mm - 1220х604х1445; loading height, mm - 785; 1 mode (toC - min - MPa) 132 - 20 - 0.2; 2 mode (toC - min - MPa) 120 - 45 - 0.11; productivity of the built-in steam generator, kg / g of steam - 15,87; voltage, V - 380; power, kW - 14; weight, no more, kg - 180.||1
|30||Cupboard with storage chambers ||Luggage cameras for donor speeches of 15-20 cells in size W * B * G 30x40h40sm.||1
|31||Modular sofa||Form: straight; filling: polyurethane foam; type sofa office modular 1800/740 / 680cm.||4
|32|| TV||Smart LED TV 6||6
|33||Office chair||Office chair: metal frame, soft leather upholstery seat and back.||7
|34||Office chair||Office chair||2
|35||Computer table||The table provides a tumbler under the system unit and a retractable keyboard drawer.|
The presence of the shelf and the right or left box, the size (LxWxH) 1200 * 600 * 780, the color is light, laminated chipboard.
|36||Computer table||Table G-shaped|
A corner table with a retractable shelf under the keyboard, a stationary staircase with three retractable drawers and an open section. The kit includes a retractable stand but a wheel support for the system unit. The table is made of laminated chipboard 16 mm, faces of the countertops, facades framed by PVC 2 mm, on other details - chalk with a minor edging. The shelf is retractable, the drawer is installed on the roller guides.
|37||Computer table||Material: LDPP 16mm, fiberboard 3.2mm, PVC plinth 2mm, melamine.|
|38||Computer table||Desk office||2
|39||Laboratory table||The size is 1600x600x780, single tumbler with 3 drawers.||10
|40||Laboratory table||Laboratory table (1200x600x800)||7
|41||Laboratory table||Laboratory table (1200x600x800)||5
|42||Laboratory table||Table Island Laboratory - 2 work stations CO-1 (1500x1200x1600)||2
|43||Laboratory table||Laboratory table, frame anodized aluminum profile; filling - melamine; countertop - Postforming special, burt; 1 retractable drawer, 1 door. 1 for a plasma: the size 1200h600h800 mm, 1 for blood: the size - 1000h600h800 mm||2
|44||Laboratory table||Laboratory table 1100x600x750 with 3 drawers||1
|45||Laboratory table||Laboratory table 1400х500х750||2
|46||Laboratory table||Laboratory table 1950h600h900 with 3 drawers and 1 door||1
|47||Laboratory chairs||The base of polyurethane is strong enough, but it maintains a significant weight. Characterized by a high level of stability, it has a durable tube at the base. The comfortable handle adjusts the height of the chair in the range 400-710 mm, so it can be adjusted for any height and equipment of the person.||15
|48||Laboratory chairs||The laboratory chair is soft on wheels||10
|49||Laboratory chairs||Chair is a laboratory soft, with a stand circle||10
|50||Laboratory chairs||Laboratory armchair with seat height adjuster||4
|Wardrobes for the two-door with a partition, with two shelves (lower for shoes, top for hats).|
Width 79cm; Height 221cm; Depth 60cm.
|Laboratory cabinet for chemreactives (450х450х1800)||5
|Laboratory cabinet for chemreactives (900х450х1800)||5
|Laboratory case for clothes (900х450х1800)||20
|Wardrobe for two-door with a partition (for outerwear and medical clothing) and two shelves (top - for headgear, lower - for shoes). Size 600x350h1840 mm.||1
|Wardrobe with movable doors on rollers, with a partition (for outerwear and medical clothing) with two shelves (top - for headgear, lower - for shoes). Size 600x350h1840 mm.||1
|Wardrobe for storage of documents The upper part - open shelves (3-4 pcs.), The bottom part - with closed doors and shelves (2-3 pcs.). Size 600x350h1840 mm.||1
|Office cabinet for documents with 2 drawers, three open and two closed shelves, mezzanine. Facades, top and bottom covers, sidewalls and shelf cabinets are made of laminated chipboard with a thickness of 18 mm. The edges are lined with a shock-proof edge of PVC in the thickness of 1 mm and 0,5 mm (shelves). Overall dimensions: length - 802 mm, width - 403 mm, height - 2186 mm with mezzanine.||4
|59||Computer||system unit with monitor or other equivalent device||5
|61||Computer armchair||Wheelchairs for the computer, a soft, seat-backed seat and back, plastic handles.||2
|62||Blinds are vertical||The main components of vertical blinds are:|
• a cornice, in which there is a rod with sliders, to which the lamellae are fastened
• lamellae - vertical strips of fabric, hanging to the cornice
• Chain for turning lamellae at different angles
• rope for moving lamellae
• Heavy duty chain tension for slats to be tall
The window size is 130x150 mm
|63||Lamp for illumination||Closed lamp under the LED lamps T8, 1,2 m, which is mounted on the wall above the table.||1
|64||The printer||Laser printer||3
|65||МФУ|| 3 in 1 Copier, Printer, Scanner.||1
|66||Automatic biochemical analyzer||тechnical characteristics:|
• 240 test / years;
• The feasibility of conducting biochemical and turbidimetric analyzes;
• Selective (patience for the passport), profilny, package, STAT modes of vikonannya testov;
• Типи вимірювань: Кінетика / Кінетика по двох точекках / Кінцева точка / діхроматична кінцева точка / Dictionaries;
• Refrigerator at 30 positsi pid 20 and 50 ml. dances with reagents;
• The supply of energy to the hunting system is not sufficient;
• 3 do not take care of the posi- tion of the tripods, yak for reagents, or for samples;
• 3 fіksovanі pozіzіі під промиваючі розчини або додаткові реагенті;
• 24 positіїї in a tripod for samples, the maximum number of samples is 72;
• The maximum number of chemical reagents is 50;
• Programmed Reagent Reagent: 10 ml. 440 ml;
• Programming of the scope: 3 ml. - 40 ml;
• Number of reactive osenedkov: 120;
• Programms of the reaction of the reaction: 200 ml. - 800 ml;
• Visokotochne dose (vidhilenya 2% with a 3 ml scope);
• System zapnibnya zitknen;
• Automatic prigozhenzhenya put the dose of the golka;
• Mozhlivіst vikoristanny for zrazkіv yak pervinnikh, so i pediatricheskih samplers;
• There is no escaped zagratenzhennia ekstrenih zrazkiv;
• Hour zchituvannya up to 15 hvilin;
• Reactivity from 200 to 800 μl;
• Вимірювальний діапазон від 0.05 to 2.5 одниць оптичної щільності;
• Spectral range from 340 to 900 nm;
• Basic information 340, 405, 505, 535, 560, 600, 635, 670 nm;
• Automatic feeding of the system ridini;
• Control of the temperature for the use of elements Pelt '(4 elements) (37 ° C);
• Kalibruvannya for the factor, a single calibrator, according to the calibrated curve (up to 8 standards);
• The number of pre-programmed tests and proficiencies is unaddressed;
• Intrinsic control program for anchors. Pobudova's curved Levey-Jenings, from the rules of Westgard;
• By the tests, on the passwords, in the control of the anchors.
|67||An analyzer for measuring the level of ALT activity||Portable spectrometer for shvidkogo analizu kapіlyarnoi blood for vmist ALT|
Work with samples on the city - portable and fully autonomous system allows you to conduct an analysis directly in the city, which significantly reduces the time to get results.
• Fast and accurate analysis - the result in seconds, the availability of the library
The intuitive interface is easy to use
|68||Microscope binocular||Biological binocular microscope of the research class, for morphological studies in transmitted light in a bright field. It is used in laboratories of medical and scientific research institutions for carrying out long-term routine and clinical studies.|
Functional model, well proven for daily long-term use. The optimal price, is available to users with a small budget.
Optics made of high-quality optical glass with anti-reflective, antifreeze, color-corrected spraying. The microscope binocular is equipped with a built-in adjustable lighting system.
- Soft coaxial mechanism of coarse and precise focusing with built-in slide sleeve, with convenient low positioning;
- Four-armed revolver;
- Two-coordinate graduated stage with bearing mechanism;
- In the construction of the stage, a screw stop is provided, which prevents accidental damage to the preparation during focusing;
- Removable product manager;
- Illumination system that provides, without additional rearrangements, illumination of the field of view of lenses with magnification from 4x to 100x;
- Adjustable halogen lighting system 6V / 20W;
- Blue color filter;
- Ergonomic acid-proof metal case with plastic pads;
- The scope of supply includes a dust cover for storage
- Video camera 5.0 Mpix USB 2.0 for outputting images to a computer
- Lens 60x achromat
- Lens 40x planaromat
- Lens 100x (MI) planahromat
- Ocular 7x
- Dark field condenser
Microscopes MICROmed have passed a full cycle of tests and examinations of the Ministry of Health of Ukraine, entered in the register of medical equipment and allowed for use in medical practice. The presence of a registration certificate of the Ministry of Health guarantees the effectiveness and safety in the use of medical equipment.
The products are certified according to the international quality standard ISO 9001: 2008.
|69||Water bath||The water bath is designed for heating and thermostating the contents during analyzes and studies requiring a constant temperature. Specialists know this type of laboratory equipment, like a liquid bath thermostat or a laboratory water thermostat. The laboratory water bath is designed for use in various scientific research, veterinary, diagnostic and industrial laboratories.|
The principle of the water bath laboratory is based on the transfer of thermal energy from the heating elements to the water in the working chamber of the bath, and in the future to installed tanks with thermostated liquid.
The bath consists of an outer casing, a working chamber of polished stainless steel, a microprocessor control unit, a digital temperature sensor, a heating element and a lid. The outer shell is separated from the working chamber by an insulator. The design of the housing provides a comfortable and safe temperature of the exterior parts. The tubular nagging element, at the bottom of the working chamber, is protected from mechanical damage by an additional protective cover.
|70||Automatic analyzer for immunohematological studies||determination of blood groups, determination of Rh factor, phenotyping, compatibility studies, antibody screening, antibody identification, direct antiglobulin test, blood sample typing||1
|71||Urine analyzer||Urine Analyzer (Dirui) is an automatic analyzer for the study of urine analytes by the method of dry chemistry on strips. The system interface allows you to connect to a PC for archiving data and a station for determining the precipitation of urine||1
|73||Laboratory wash||Laboratory wash: frame - anodized aluminum profile, filling - melamine plate, xs-plastic. 1 door, 3 drawers, 1 sink, 1 mixer, siphon. (1200х600х800)||1
|74||Cabinet is laboratory||Cabinet is laboratory. Frame - anodized aluminum profile, filling - melamine, xs-plastic. 4 drawers.(450*450*600)||5
|75||Equipment for screening of donor blood by immunohemuluscent method||Performance:|
200 tests per hour.
chemiluminescent immunoassay on paramagnetic particles.
Single multifunctional loader:
simultaneous loading of 135 samples to a multifunctional loader with front access, 35 positions for urgent samples, calibrators, controls, universal tripods for samples, calibrators, controls, the possibility of simultaneous work with different types of tubes, automatic dilution, repeated and reflex testing; routine, the mode of working with the samples: arbitrary, sequential and immediate.
Time to get the first result:
29 minutes of standard protocols, 18 minutes of truncated protocols.
Modern unique technologies:
a clot detection system, an improved acridine tag (Chemiflex), flexible protocols (one-two-step, pre-incubation, truncated (STAT) protocols.
Reagents on board:
25 in the cooled carousel
ready for use without preliminary preparation, packaging for a different number of tests.
easy to use, touch screen, on-line diagnostics, electronic operation manual, connection to the AbbottLink remote service diagnostics system, integrated quality control using Westgard rules and Levy-Jennings charts, database of results no less than for 50,000 results, a bi-directional RS232C port for connecting to a laboratory information system and other software.
|76||Equipment for screening of donor blood by polymerase chain reaction (closed system by type TAGMAN)||The automated system cobas s 201 is designed to screen blood plasma from individual donor samples (or pools of equal individual aliquots of donor plasma) to detect infectious agents using the PCR method based on 5'-nuclease detection in real time. The system does not require separate specialized premises, boxes and special air purification. The system is designed for 4-channel expansion of the types of infections detected.|
The system's performance is 150 donations per hour, the following viral nucleic acids are identified: HIV-1 RNA of the M and O group, HIV-2 RNA, hepatitis C RNA, hepatitis B DNA.
Automatic analyzer for the isolation of DNA and RNA Cobas AmpliPrep
Integrated through system of processing samples by conveyor method for purification and isolation of nucleic acids from donor blood. When preparing the sample, a washing solution, special reagent cassettes and incubations at various temperatures are used.
|77||Вlood pressure monitor||Specifications:|
TM-2655P blood pressure monitor (sphyg) from A & D is the perfect automatic whole-arm sphygmomanometer for waiting room testing
The TM-2655P blood pressure monitor (sphyg) from A & D is the perfect automatic whole-arm sphygmomanometer for waiting room testing. Its ergonomic design allows the patient to sit comfortably, thereby improving posture resulting in greater accuracy.
Blood pressure readings can be taken using either arm which is especially convenient for pregnant women, patients with back problems and patients in wheelchairs.
The simplicity of the TM-2655P allows the patient to test themselves upon arrival at the surgery which not only saves patient and GP consultation time, but helps to reduce or alleviate 'white coat' syndrome.
Results are printed on thermal paper which the patient can then hand to the GP or Practice Nurse. The printouts can then be stored as an auditable record in the patient record system.
New for 2009 is the TM-2655P's Irregular Heartbeat Indicator which is indicated on the printout if detected during a measurement. This indication is a useful alert to the possibility of an arrhythmia.
· Clinically validated to AAMI/ANSI SP10 Protocol
· Large LED display
· Energy saving function - automatically switches off 3 minutes after last measurement
· Infra-red sensor automatically turns power on when the next patient sits at the unit
· Selectable printout formats
· Compact size allows easy placement in any waiting room
· Emergency Stop button
· 2 year warranty
· Cuff circumference: 180mm to 370mm
· Measurement method: Oscillometric
· Blood pressure range: 0 - 280mmHg (±3mmHg or 2%)
· Pulse range: 30 - 200 bpm
· Dimensions: 245 x 320 x 390mm (W x H x D)
· Weight: 9kg
The TM-2655P is supplied complete with Printer, Stand, Locking Cable and Spare Cloth.
|78||LED панель||LED панель 24-36 Вт||50
|79||Electric kettle||Electric kettle, total volume of 10 l, useful volume 8,5 l, single wall 0,4 mm, Stainless steel, when the temperature falls below 80 degrees, automatically switched on heating.||1
|80||Archival shelf||Archival shelf|
Section width: 600 mm
Height: 2000 mm
Depth: 400 mm
Size: 600x400h2000 mm
Number of shelves: 6 pcs.
Load: 75 per kg
Attachment type: On bolts
• Material - Steel
• Stall thickness 1.5 mm, shelf 0,8 mm.
• Color - White, powder paint.
• Support - Plastic podpyatniki
• The rack punching step is 50 mm.
• Load on the shelf - no more than 75 kg.
|81||Lift||Lift lifting capacity 250kg for 4 stops, the size of the cabin 1000 * 1000 * 1200, cab stainless steel.||1
|82||Cooler||cooler with bottled boot Special curved, length-adjustable fence tube allows to take water from the bottle without any residue. Three water supply tap: hot, cool and cold Tray with built-in float, signaling the filling Pumping water into the cooler system is carried out using an aqueous pump Racking shelf is missing||4